UPS for Medical Applications

Some Medical applications require Medical-grade UPS protection tested to CE/IEC 60601-1. These types of UPS commonly have built-in isolation transformer with Faraday shield removing common mode noise while maintaining full AC surge suppression in all modes. Typically they are resistant to electrostatic discharge and usually Includes high quality hospital-grade plug and outlets.

Chloride ONEAC 300va & 600va Medical UPS

ONEAC’s proprietary power conditioning technology eliminates power problems entirely. Providing a level of protection that even the highest quality surge suppressor and filter technology cannot match. When installed in systems as prescribed in IEC60601-1, ON Series Medical-Grade UPSs are uniquely suitable for clinical chemistry analysis systems and clinical information systems used in environments that require limited earth-leakage current.

Global certifications: UL1778, UL2601-1/60601-1, EN60601-1, CSA 22.2 listed.
Full-time, on-line isolating transformer: eliminates power contaminants.
ONBoost®: Compensated for line sags and brown-outs, conserves batteries.
On site, online replaceable battery: minimises cost and downtime.
Automatic self-test: ensures battery and system readiness.
Manufactured under ISO 9001: assures consistent quality and performance.

Tripplite Medical Grade 700va & 1200va UPS

Tripp Lite’s SMX range offers medical-grade UPS protection with built-in line interactive voltage regulation, intelligent monitoring and unattended shutdown capability. Tested to CE/IEC 60601-1 as medical electrical equipment. Built-in isolation transformer with Faraday shield removes common mode noise while maintaining full AC surge suppression in all modes. Resistant to electrostatic discharge. Includes high quality hospital-grade plug and outlets.

700VA or 1200va power handling capacity supports computers, inter-networking equipment and other critical loads during commercial power failures. Line interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274 back to normal 230V levels, saving battery reserves for use only during complete power failures. Includes 6 outlets, diagnostic LEDs and built-in USB & RS-232 communications ports that work with downloadable PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.